Firmware

FMC410 – Ten-channel 6.25 or 10 Gbps Optical Links | Dual 10Gb / Dual 40Gb Ethernet port | HPC Board

Ten-channel 6.25 or 10 Gbps Optical Links
Dual 10Gb or dual 40Gb Ethernet port

The FMC410 is an optical transceiver module in the FMC form factor that offers ten independent optical transmit and receive links with maximum data rates of either 6.25Gbps or 10Gbps. This COTS card provides high-speed optical input and output for telecommunications, data networking, data storage, and ultra-high-definition video applications. The FMC410 can also be used as a dual 10Gb or dual 40Gb Ethernet port.

 

The design is based on Avago Technologies’ AFBR-776BEHZ / AFBR-810BEHZ optical transmitters and AFBR-786BEHZ / AFBR-820BEHZ optical receivers. The FMC410 offers a programmable reference clock that is controlled through serial I2C communication. It has a high-pin count (HPC) connector and six bidirectional front panel I/Os.

 

The FMC410 is electrically and mechanically compliant to FMC standard (ANSI/VITA 57.1) except for its height. This daughter card is 3.4 mm higher than the maximum component height of 9.5 mm specified by the FMC standard. It is therefore equipped with a connector that provides a stacking height of 13.5 mm instead of the standard 10 mm. The card can still be used without issues on many FPGA carrier cards and FPGA development platforms.

 

Features

  • Ten independent transmit channels
  • Ten independent receive channels
  • High channel capacity: 6.25Gbps or 10Gbps per direction (TX/RX)
  • High port density
  • Separate transmitter and receiver modules
  • 13.5 mm stacking height
  • Low power consumption

 

fmc410_diagram_large

 

ds_popup_1